Palm Centro - Page 192

YOUR APPLICATION AND INFO MANAGEMENT TOOLS
USING EXPANSION CARDS
192
10
CHAPTER
Inserting a microSD expansion card
1 Gently press down on the battery door,
and then slide the door downward to
remove it from your smartphone.
2 Open the expansion slot door.
3 Hold your smartphone with the screen
facing you, and hold the card with the
label facing you. The notch on the card
should be pointing toward you.
4 Insert the microSD card into the
microSD expansion card slot until you
feel it lock into place.
5 Close the expansion slot door.
6 Replace the battery door.
Removing a microSD expansion card
1 Gently press down on the battery door,
and then slide the door downward to
remove it from your device.
2 Open the microSD expansion slot door.
3 Press the card into the expansion slot to
release it from the expansion slot.
4 After you feel the microSD expansion
card slot eject the card, remove the card
from the slot.
5 Close the expansion slot door.
6 Replace the battery door.
TIP The microSD expansion card slot has a
push-push mechanism: push in gently to
insert a microSD card; push in gently to
remove it.
TIP If the Ringer switch is set to Sound On,
you hear a confirmation tone when you insert
or remove a microSD expansion card.