YOUR APPLICATION AND INFO MANAGEMENT TOOLS
SYNCHRONIZING INFORMATION—ADVANCED
185
10
CHAPTER
Preferences is set to On. See Optimizing
power settings for details.
1 Turn on your screen.
2 Select the beam command on the
transmitting device.
3 Point the IR port on your smartphone
directly at the IR port of the transmitting
device to open the Beam Status dialog
box.
4 When the Beam Status dialog box
appears, select a category for the entry.
5 Select Ye s to receive the information or
No to refuse it.
Synchronizing
information—
advanced
Changing which applications sync
By default, information from Calendar,
Contacts, Memos, Pictures & Videos, and
Tasks is updated each time you
synchronize your smartphone. You can
change which applications synchronize. For
example, if you don’t use the Memos
application and you want to speed up
synchronization, you can turn off
synchronization for Memos.
TIP
If you do not select a category when you
receive a beamed item, the item is placed in
the Unfiled category.
TIP
If you can’t receive beamed info, make
sure that you are not running a third-party app
that disables beaming. If you still can’t receive
a beam, try a soft reset (see Resetting your
smartphone).
DID
YOU
KNOW
?
You can store a beamed app
on your smartphone or send it to a microSD
expansion card inserted into the expansion
card slot.
TIP
Windows If you set up your smartphone
to sync with Outlook, you can learn how to
change which applications synchronize and
change their synchronization settings by doing
the following: Click the HotSync manager
icon in the taskbar and click Settings. Click
Applications, highlight a conduit that syncs
with Outlook, click Configure, and then click
Help. You cannot synchronize messages in
Outlook with messages in the VersaMail
application on your smartphone.
To Next Page
Loading...
