YOUR PERSONAL SETTINGS
LOCKING YOUR SMARTPHONE AND INFO
208
11
CHAPTER
• Immediately locks your phone when
you select OK. The next time you dial
a number, you must enter your lock
code to unlock your phone. After that,
you can continue to make calls
without entering your lock code,
unless you select one of the phone
lock options.
6 When prompted, enter the lock code,
and then select OK. (Unless you
changed your lock code, it is the last
four digits of your phone number.)
7 If you want to change the lock code,
select Change Lock Code, enter a new
lock code, and then select OK. Repeat
this step to verify the new lock code.
8 Select OK. If you selected Immediately
in step 5, your phone locks right away. If
you selected On phone power off, your
phone locks the next time you press
and hold Power/End to turn off your
phone.
To disable the current Phone Lock
settings:
1 Press Phone .
2 Press Menu .
3 Select Options and then select Phone
Lock.
4 Uncheck the On phone power off box
and enter your lock code to change this
setting.
5 Select OK twice.
Locking your smartphone
To protect your personal information, you
can lock your smartphone so that you need
to enter your password to access any of
your information or to use any of the
features on your smartphone, including the
phone. You can, however, still make
emergency calls when your smartphone is
locked.
IMPORTANT If you lock your smartphone,
you must enter the exact password to
unlock it. If you forget the password, you
need to perform a hard reset to resume
using your smartphone. Performing a hard
reset while your smartphone is locked by a
password deletes all the entries in your
smartphone and completely reformats it. If
you use password protection in
Palm Desktop software, you must
To Next Page
Loading...
