SETTING UP
SETTING UP YOUR COMPUTER FOR SYNCHRONIZATION
29
2
CHAPTER
• The installation process prompts you
to connect your smartphone to your
computer. Go to the next section.
Connecting your smartphone to your
computer
After you install the desktop software (see
Installing the desktop synchronization
software), you’re ready to connect your
smartphone to your computer.
1 Plug the AC charger into a wall outlet.
2 Plug the USB sync cable into an
available USB port or into a powered
USB hub connected to your computer.
3 With the sync button facing up, connect
the sync cable to the bottom of your
smartphone. Do not press the sync
button until you are instructed to do so.
4 (Optional) Connect the charger cable to
the bottom of your smartphone.
You are now ready to synchronize; go to
the next section, Synchronizing
information—the basics.
1 Sync cable
2 Sync button
TIP
For best performance, plug your sync
cable directly into a USB port on your
computer. If your computer has USB ports on
both the front and back, we recommend using
the back port; the front port is often a
low-power port. If you use a USB hub, make
sure the hub has its own power supply.
To Next Page
Loading...
