Performing HotSync
®
Operations
154
Performing a cradle HotSync operation: Windows
The first time you synchronize your data, you need to enter user information on
Palm Desktop software. After you enter this information and synchronize, the
HotSync Manager recognizes your handheld and doesn’t ask for this information
again.
If you are a System Administrator preparing several handhelds for a group of
users, you may want to create a user profile. See“Creating a User Profile” later in
this chapter before performing the following steps.
IMPORTANT
You must perform your
first
HotSync operation with a local, direct
connection, or with infrared communication, rather than using a modem.
The following steps assume that you have already installed Palm Desktop
software. If you have not installed this software, seeSee “Step 3: Install Software”
in Chapter 1 for instructions.
To perform a local HotSync operation on a Windows computer:
1. Place your handheld on the cradle.
2. If the HotSync Manager is not running, start it: On the Windows desktop, click
Start, and then choose Programs. Navigate to the Palm Desktop software
program group and choose HotSync Manager. Alternatively, you can start the
Palm Desktop software which automatically opens the HotSync Manager.
To Next Page
Loading...
