Palm i705 - Selecting the Conduits for a Modem Hotsync Operation; Performing a Hotsync Operation Via a Modem

Conducting a HotSync Operation Via Modem
165
9. If you want to use a calling card to place the call, select the check box and enter
the calling card number.
10. Tap OK.
Selecting the conduits for a modem HotSync operation
The Conduit Setup dialog box on your handheld enables you to define which files
and/or applications synchronize during a modem HotSync operation. You can use
these settings to minimize the time required to synchronize data with a modem.
To change the Conduit Setup for a modem HotSync operation:
1. Tap the Applications icon .
2. Tap the HotSync icon .
3. Tap the Menu icon .
4. Tap Options, and then tap Conduit Setup.
5. Tap the check boxes to deselect the files and applications that you do not want
to synchronize during a modem HotSync operation. The default setting is to
synchronize all files.
Applications that do not have a database (such as games) do not synchronize —
even if you select the item in the Conduit Setup dialog box.
6. Tap OK.
Performing a HotSync operation via a modem
After you prepare your computer and your handheld, and select your Conduit
Setup options, you are ready to perform a modem HotSync operation.
To perform a modem HotSync operation:
1. Tap the Applications icon .
2. Tap the HotSync icon .
3. Tap the Modem icon to dial the Palm Desktop modem and synchronize the
applications.