Viewing Preferences
181
Editing connections
The following example shows you how to edit the IR to Phone connection to adjust
the communication speed; you can similarly edit other connections or settings. You
can use the IR to Phone connection to perform a remote IR HotSync operation. To
accomplish the HotSync operation, your handheld sends data through its IR port
to a modem attached to or within a mobile phone, which then dials a modem
attached to or within your desktop computer, to synchronize with your Desktop
application.
To edit the IR to Phone connection:
1. Select the IR to Phone connection and tap Edit.
2. Tap Details.
3. Tap the Speed pick list and select the appropriate speed.
Modem via Cradle/Cable:
A cable connection between your
handheld’s universal connector and a modem for dialing in to a
modem that is part of your computer or laptop.
PC via Infrared:
A connection between the IR port of your handheld
and the infrared device of your computer or laptop.
Modem via Infrared:
A connection between the IR port of your
handheld and a modem. The modem can be attached to or within a
mobile phone or some other device containing an IR port. (Some IR
phones contain modems.)
Ta p h e r e
To Next Page
Loading...
