Palm i705 - Page 195

Viewing Preferences
185
2. Tap the connection you want to use.
Adding telephone settings
When you select the Phone field, your handheld opens a dialog box in which you
define the telephone number you use to connect with your ISP or dial-in server. In
addition, you can also define a prefix, disable Call Waiting, and give special
instructions for using a calling card.
NOTE
The Phone Setup dialog box works correctly for AT&T and Sprint long-
distance services. However, because MCI works differently, MCI customers need to
put the calling card number in the Phone # field and the phone number in the Use
calling card field.
To enter your server phone number:
1. Tap the Phone field.
2. Enter the phone number for your ISP or dial-in server.
3. If you need to enter a prefix or disable Call Waiting, skip to those procedures.
Otherwise, tap OK.
Entering a prefix
A prefix is a number that you dial before the telephone number to access an outside
line. For example, many offices require that you dial “9” to dial a number outside
the building.
To enter a prefix:
1. Tap the Dial Prefix check box to select it.
2. Enter the prefix.
Enter your ISP phone
number here
Enter your
prefix here
Select this
box if you
need to use a
prefix