Setting Preferences for Your Handheld
188
server. You use the Details dialog box to add additional information to a selected
service template.
To select a connection type:
1. Tap the service field.
2. Tap Details.
3. Tap the Connection type pick list and select one of the following connection
types:
If you are not sure, try PPP; if that doesn’t work, ask your Internet Service
Provider or your System Administrator for the correct connection type.
Note to Seattle engineers: Is the connection type pick list (above) gone? Can’t tell
from Poser, but I believe this is no longer an editable field. Please confirm/correct.
Idle timeout
The Idle timeout setting defines how long your handheld waits before dropping
the connection with your ISP or dial-in server when you switch out of a TCP/IP
application.
PPP
Point-to-Point protocol
SLIP
Serial Line Internet Protocol
CSLIP
Compressed Serial Line Internet Protocol
Select connection type
To Next Page
Loading...
