Setting Preferences for Your Handheld
190
To identify dynamic IP addressing:
■ Tap the IP Address check box to select it.
To enter a permanent IP address:
1. Tap the IP Address check box to deselect it and display a permanent IP address
field below the check box.
2. Tap the space to the left of the first period then enter the first section of the IP
address.
Each section must be a number from 0 to 255.
3. Tap and enter the remaining sections of the IP address.
4. Tap OK.
Login scripts
A login script is a series of commands that automates logging in to a network
server, for example, your corporate network or your Internet Service Provider
(ISP). A login script is associated with a specific service template created in
Network Preferences.
A login script is something that you are likely to receive from your IS System
Administrator if your company has a system in which you log in to the corporate
servers from your handheld using a modem or network connection. The script is
generally prepared by the System Administrator and distributed to users who
need it. It automates the events that must take place in order to establish a
connection between your handheld and the corporate servers.
You can create login scripts in two ways:
■ In a text editor on your desktop computer, in which you create a file with the
extension PNC, which you then install on your handheld using the Install Tool
(this method is not available to Macintosh users)
■ In the Login Script dialog box on your handheld, accessed from the Details
dialog box in Network Preferences
Tap to select automatic IP
address
To Next Page
Loading...
