16 Section 1A: Device Setup
Charging the Battery
The battery comes with a sufficient charge to complete the setup process and activate your
phone. After activation, we recommend charging your device for three and a half hours to
give it a full charge. See “Maximizing Battery Life” on page 19 for tips on maximizing the
life of your device’s battery.
1. Plug the AC charger into a wall outlet.
2. Connect the charger cable to the charger jack on the bottom of the device. Make sure
the arrow on the connector is facing up, toward your device’s screen.
3. To confirm that your device is charging, check the indicator light.
䡲 Red indicates that your device is charging.
䡲 Green indicates that your device is fully charged.
If the battery is fully drained, it may take a few moments for the indicator light to turn on
while the battery is charging.
To Next Page
Loading...
Need help?
General
