Section 6B: Customizing 273
Customizing
To turn off Keyguard, do the following:
1. If the screen is off, press Power/End to wake up the
screen.
2. Press Center to turn off Keyguard.
䢇 To turn on Keyguard, press Option and then press
Power/End .
You can change how quickly Keyguard turns on, or you can disable
the feature altogether. To change the Keyguard settings, do the
following:
1. Press Applications and select Prefs .
2. Select Keyguard.
3. Select the Auto-Keyguard pick list, and then do one of the following:
䡲 Select how quickly you want Keyguard to turn on: When power is turned off,
5 seconds after power off, or 30 seconds after power off.
䡲 Select Disabled to completely disable the Keyguard feature until you turn it
on again.
4. Select Done.
Note:
If you disabled Keyguard, you can turn Keyguard on manually by
pressing Option + Power/End when the screen is on. If you use this
method, Keyguard stays on only until you press Center to turn it off; it
does not come back on. To permanently re-enable Keyguard, follow the
preceding procedure and select one of the options from the
Auto-Keyguard list.
To Next Page
Loading...
