Palm Zire 71 - Modifying a Location; Removing a Location; Setting an Alarm

Modifying a location
159
Modifying a location
If you add a location and later realize you did not use the correct settings, you can
modify the location.
To modify a location:
1. Tap a Location pick list.
2. Select Edit List.
3. Select the location you want to modify.
4. Tap Edit.
5. Adjust the settings. See “Adding a location” earlier in this chapter for details.
6. Tap OK .
7. Tap Do n e.
Removing a location
If you no longer need a location that appears in the Location list, you can remove
it. However, you cannot remove a location that is currently assigned to the primary
location.
To remove a location:
1. Tap a Location pick list.
2. Select Edit List.
3. Select the location you want to remove.
4. Tap R emov e.
5. Tap OK to confirm the deletion.
6. Tap Do n e.
Setting an alarm
In addition to setting and displaying the date and time, World Clock also provides
a convenient travel alarm feature. You can set an alarm to sound during the next
24-hour period.