Step 3: Set up your handheld
7
Step 3: Set up your handheld
a. Press the power button to turn on your handheld.
If your handheld did not turn on, see “Operating problems” in Appendix B.
b. Slide the stylus out of the storage slot.
c. Hold the stylus as you would a pen or pencil, and use it to follow the onscreen
directions.
Step 4: Install software
a. Insert the Desktop Software CD-ROM into your computer’s CD-ROM drive.
b. Windows: Follow the onscreen instructions, which guide you through installing
Palm Desktop software and entering your handheld business card information.
Mac: Double-click the Palm Desktop CD icon that appears on the desktop, and
then double-click the Palm Desktop Installer icon.
NOTE
You need administrator rights to install Palm Desktop software on a
computer running Windows NT/2000/XP or Mac OS X.
To Next Page
Loading...
