Palm Zire 71 - Page 193

Conducting network HotSync operations
183
3. From the HotSync Manager menu, select Setup.
4. Click the Network tab and make sure your user name has a checkmark next to
it. If the checkmark is not there, click the check box next to your user name.
5. Click OK.
6. Put your handheld in the cradle/cable, and perform a HotSync operation.
The HotSync operation records network information about your computer on
your handheld. With this information, your handheld can locate your computer
when you perform a HotSync operation over the network.
To prepare your handheld for a network HotSync operation:
1. Tap the Home icon .
2. Select the HotSync icon .
3. Tap the Menu icon .
4. Select Modem Sync Prefs from the Options menu.
5. Tap Network.