Palm Zire 72 - Synchronizing Using the IR Port

Zire™ 72 Handheld 78
CHAPTER 5 Synchronizing Your Handheld with Your Computer
Synchronizing using the IR port
When you synchronize using your handheld’s IR port, you don’t need your cable. This is especially
useful if you travel with an IR-enabled laptop.
WINDOWS ONLY
0
1 Prepare your computer for IR synchronization:
a. Click the HotSync Manager icon in the taskbar in the lower-right corner of
your screen.
b. Make sure that Infrared is selected.
Continued
Before You Begin
[ ! ]
Your computer must have
an enabled IR port and
driver or have an IR
device attached to it.
Check your computer's
documentation to see if it
supports IR
communication.