Palm Zire 72 - Using Tap-To-Connect

Zire™ 72 Handheld 128
CHAPTER 7 Managing Your Contacts
Using Tap-to-Connect
With Tap-to-Connect, you can select a contact and dial a phone number or address an e-mail, text,
or multimedia message by selecting the appropriate entry on the contact screen. By default, Tap-
to-Connect is not enabled.
0
1 Press the Contacts application button.
2 Enable Tap-to-Connect:
a. From the Contacts list, open the menus
.
b. Select Options, and then select Preferences.
c. Tap Enable Tap-to-Connect, and then tap OK.
Continued
Before You Begin
[ ! ]
You must have a
compatible mobile phone
(sold separately) that
includes Bluetooth
technology and install the
e-mail software included
on the CD. You must also
complete all the
prerequisites for the
e-mail and messaging
applications.
To use Tap-to-Connect
with your handheld’s
built-in Bluetooth
technology, you must set
up a phone connection.
To use it with your
handheld’s IR port, run
Phone Link Updater
and
then use the Phone Link
application to set up a
phone connection.