Palm Zire 72 - Using Quick Unlock; Creating a Quick Unlock Combination

Zire™ 72 Handheld 517
CHAPTER 23 Keeping Your Information Private
Using Quick Unlock
You can unlock your handheld by creating a special combination sequence with the navigator—
similar to the combination you use to open a padlock. Use this sequence in place of your
password to quickly unlock your handheld. Quick Unlock works only with your first three attempts
to unlock your handheld. After three attempts, you must use your password to unlock your
handheld.
Creating a Quick Unlock combination
0
1 Open Security:
a. Go to the Home screen.
b. Select Prefs .
c. Select Security.
2 Open the Quick Unlock dialog box:
a. Tap the Quick Unlock box.
b. If necessary, enter your password, and then select OK.
Continued
Before You Begin
[ ! ]
To use Quick Unlock, you
must first create a
password for your
handheld.
Tip
You can change a Quick
Unlock combination at
any time. Follow the
same steps you used to
create the combination.
Quick Unlock box