Palm Zire 72 - Charging Your Handheld

Zire™ 72 Handheld 4
CHAPTER 1 Setting Up Your Handheld and Your Computer
Step 1: Charging your handheld
0
1 Plug the power adapter into your
new handheld and into an outlet.
Do not connect the HotSync
cable to your handheld until
later.
2 Charge your handheld for three hours. Be sure your handheld is fully charged
before going on to Step 2.
Done
Before You Begin
[ ! ]
If you’re upgrading from
another Palm OS
®
handheld, synchronize
your old handheld with
your old desktop
software.
Tip
After the initial charge,
charge your handheld at
least half an hour every
day.