Zire™ 72 Handheld 14
CHAPTER 1 Setting Up Your Handheld and Your Computer
Synchronizing with a user profile
WINDOWS ONLY
0
3 Select the profile from the User pop-up menu, and create the info in
Palm Desktop software for the profile.
4 Set the profile’s conduit settings:
a. From the HotSync menu, select Conduit Settings.
b. Select the conduit settings
for the profile.
Done
1 Begin synchronization:
a. Connect the HotSync cable to the USB port on your computer, and then
insert the other end into the mini-USB connector on your handheld.
b. Make sure your handheld is on.
c. Tap Star
.
Continued
To Next Page
Loading...
