Palm Zire 72 - Synchronizing by Connecting to a Computer on the Network

Zire™ 72 Handheld 87
CHAPTER 5 Synchronizing Your Handheld with Your Computer
Synchronizing by connecting to a computer on the network
0
1 Prepare the computers for network synchronization:
a. Click the HotSync Manager icon in the taskbar in the lower-right corner of
the screen.
b. Select Network.
You must select Network on both the computer to which you are
connecting and the computer with which you want to synchronize.
Continued
Before You Begin
[ ! ]
In addition to the general
requirements for network
synchronization, you
must meet the following
requirements in order to
synchronize by
connecting with a
computer on the network:
• To connect using your
handheld’s IR port, the
computer to which you
are connecting must be
IR-compatible.
• The computer to which
you are connecting must
have a version of
Palm Desktop software
that is compatible with
your handheld.
• The computer with
which you want to
synchronize (your own
computer) must be
turned on.
NOTE