13
OVER-RIDE FUNCTION
The OVER-RIDE function allows the user to manually over-ride the preset program to operate the heater.
[Press OVER-RIDE button]
Over-ride operation is switched ON:
• The OVER-RIDE light glows
• After combustion the ON / OFF light glows red.
• Set temperature and Room temperature will appear on the screen.
Over-ride operation is switched OFF:
Over-ride light glows.
ON / OFF light glows green and timers are ready.
After the heater turns off the convection fan will continue to operate for up to 4 minutes. Do not unplug while
fan is operational.
Between Timer Operation
Press {OVER-RIDE} button ON …The heater operates while the timers are on hold.
Press {OVER-RIDE} button OFF…The heater turns off and the preset program will resume.
During Timer Operation
Press {OVER-RIDE} button ON …Stops operation.
Press {OVER-RIDE} button OFF…The heater will operate again.
To Next Page
Loading...
