What you can do with this unit
23
(ENG) DVQX2103
Card reader mode
Data (files) for performing nonlinear editing on a computer are transferred.
≥ The unit supports USB2.0.
*1 Memory cards are optionally available. They are not supplied with the unit.
*2 A USB2.0 cable is not supplied with the unit.
Use a commercially-available generic USB cable conforming to USB2.0. If possible, we
recommend using a cable with a length of 1.5 m (approx. 4.9 feet) or less.
The unit does not offer a bus-powered function.
Connecting to the network
(For the /)
This unit is equipped with wireless LAN. It can connect to wireless LAN devices via a network.
(For the )
This unit is equipped with wireless LAN. It can connect to networks via wireless LAN or wired
LAN.
To use a wired LAN, use the supplied USB HOST conversion cable and USB ethernet adaptor
to connect a LAN cable.
Use the following cable for connections:
j LAN cable (STP
*
, category 5 or better, maximum 100 m (approx. 328 feet))
* STP (Shielded Twisted Pair)
0 Do not use any other USB HOST conversion cables except the supplied one.
0 Do not use any other USB ethernet adaptors except the supplied one.
A Memory card
*1
B USB2.0 cable
*2
C Computer
CX7
CX10
AG-CX7_CX8_CX10-DVQX2103_eng.book 23 ページ ２０２０年１月６日 月曜日 午後２時４８分
To Next Page
Loading...
