EasyManua.ls Logo

Panasonic AG-CX10 - Power Supply; Attaching and Removing the Battery

Panasonic AG-CX10
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Power supply
32
DVQX2103 (ENG)
Power supply
A battery or the supplied AC adaptor can be used as the power supply for the unit.
The unit is compatible to following batteries. (As of January 2020)
j AG-VBR59 (supplied/optional, supports quick charging)
j VW-VBD58 (optional)
AG-VBR59 supports quick charging. Use a battery charger (AG-BRD50: optional) to perform
quick charging.
Attaching and removing the battery
¥ Press the power button to turn off the unit. (l 42)
Attaching the battery
1 Push the battery against the battery
mounting section on the main unit and
slide forward to attach.
Press in the battery until it clicks and gets
locked.
A Battery mounting section
Removing the battery
Be sure to hold down the power button until
the status indicator goes off. Then remove the
battery while supporting the unit to prevent it
from dropping.
B Status indicator
Move the battery release lever in the direction
indicated by the arrow and remove the battery
when unlocked.
AG-CX7_CX8_CX10-DVQX2103_eng.book 32 ージ 020年1月6日 月曜日 午後2時48分

Other manuals for Panasonic AG-CX10

Related product manuals