Updating the unit’s firmware
54
DVQX2103 (ENG)
Updating the unit’s firmware
Confirm the firmware version of the unit in the [OTHERS] menu → [INFORMATION] →
[VERSION], access the most current information regarding firmware in the website described
in NOTE, and download the firmware as necessary.
0 Update is completed by loading the downloaded file to the unit via the memory card. Insert
the memory card that stores the update file into card slot 1, and select the [OTHERS] menu
→ [INFORMATION] → [UPDATE].
For update method, refer to the support desk at the following website:
https://pro-av.panasonic.net/en/products/ag-cx10/index.html
(This Site is English only)
0 When updating the firmware, use the AC adaptor or sufficiently charged battery.
0 Do not turn off the power while updating the firmware. Rewriting of the firmware may fail and
the unit may not be activated.
AG-CX7_CX8_CX10-DVQX2103_eng.book 54 ページ ２０２０年１月６日 月曜日 午後２時４８分
To Next Page
Loading...
