Panasonic AG-CX10 - Page 26

Description of parts
26
DVQX2103 (ENG)
7 Card slot 1 (l 40)
A slot for the memory card.
8 Card 1 access lamp
Indicates the access status for recording
and playback of the memory card
inserted in card slot 1.
9 Card slot 2 (l 40)
A slot for the memory card.
10 Card 2 access lamp
Indicates the access status for recording
and playback of the memory card
inserted in card slot 2.
11 Built-in speaker
Outputs audio during playback.
Audio is not output from the built-in
speaker when headphones are
connected to the headphone terminal.
12 <SLOT SEL> button
Selects the card slot to record to or play
back from.
13 <USER1> button
Used as a USER button (USER1).
≥[LEVEL GAUGE] is allocated at the
time of purchase.
Switches display/hide of level gauge.
14 <USER2> button
Used as a USER button (USER2).
≥[BACKLIGHT] is allocated at the time
of purchase.
Switches enable/disable of the auto iris
control function for backlight
compensation.
15 <O.I.S.>/<USER3> button
Switches enable/disable of the optical
image stabilizer function.
This is also used as the USER button
(USER3).
16 <THUMBNAIL> button (l 53)
Press the button to switch between the
camera image screen and the thumbnail
screen.
17 <DISP/MODE CHK> button
Switches display/hide of information
other than the time counter, time stamp,
zebra pattern, and marker.
Press and hold the button to display
information about the settings of the
various shooting functions and
information such as a list of the functions
assigned to the USER button. Each
press of the button switches the
information page in order.
18 Diopter adjustment dial
Adjusts the diopter scale so that the
viewfinder screen can be viewed clearly.
19 Eyepiece
Do not leave the eyepiece pointed
toward the sun. Doing so might damage
the devices inside.
20 Eye cup (l 36)
21 Power button (l 42)
Press the button to switch the power on/
off.
22 <WHITE BAL> button (l 50)
Selects the method for adjustment of the
white balance.
23 <AE LEVEL>/<USER4> button (l 50)
Switches enable/disable of the AE level
function.
Set the target value of the AE level in the
[SCENE FILE] menu → [AE LEVEL
EFFECT].
This is also used as the USER button
(USER4).
24 <AUTO/MANU> switch (l 48)
Selects the method to adjust the focus,
gain, iris, white balance, and shutter
speed at shooting.
<AUTO>:
Adjusts automatically. (Auto mode)
<MANU>:
Adjusts manually. (Manual mode)
25 <SHUTTER> button (l 52)
Switches the shutter mode.
AG-CX7_CX8_CX10-DVQX2103_eng.book 26 ページ ２０２０年１月６日 月曜日 午後２時４８分