Firmware Ver. 1.4 — Support for Simultaneous Output from <SDI OUT> Terminal and <HDMI> Terminal [CX8]/[CX10]
- F 7 -
Screen display during shooting
The following indicator has been added.
1
External equipment recording operation control status (<SDI OUT>/<HDMI> terminal)
Displays the control status of the recording start and recording stop on the external equipment connected to the <SDI OUT> terminal and the
<HDMI> terminal.
≥ [S/H]: Recording instruction is output to the output from the <SDI OUT> terminal/<HDMI> terminal.
≥ [S/H]: Pause instruction is output to the output from the <SDI OUT> terminal/<HDMI> terminal.
TCG 1 2 : 3 4 : 5 6 : 2 8
2160-59.94p
MOV HEVC 200M
A001C001
Ach
IP REMOTE
30dB ND:CLR 1/8000 F5.6
+1.0EVDEC 3 1 2 0 2 0 1 0 : 4 5 : 3 0
iZ50
MF99
D2x
IR
70%
HDMI INTRVL
ND1/16
FLUO
999min 999min
S.SLOW120
FBC
RELAY
DRS
STD
[ + ]
CH1
CH2
ICONS
VOLUME [ - ]
1
To Next Page
Loading...
