117
Manipulating Clips with Thumbnails : Properties
Manipulating Clips with Thumbnails
The status display enables a confirmation of the SD
memory card formatted condition, available memory
capacity etc.
From the thumbnail menu, select PROPERTY
>
DEVICES > SD CARD.
If the format is compatible with SD standards, the message
“SD STANDARD: SUPPORTED” is displayed.
If the format is not compatible with SD standards, the
message “SD STANDARD: NOT SUPPORTED” is
displayed. If this is the case, writing or reading will not be
successful. Format the card with the AJ-SPX800P. For
more on formatting SD memory cards, see [Formatting SD
memory cards] (page 113).
Attaching the video encoder card (AJ-YAX800G, optional),
select PROPERTY
> DEVICES > PROXY from the
thumbnail menu.
The number of the slot in which the video encoder card is
inserted is displayed.
SD memory card Status Display
Video Encoder Card Status Display (optional)
AJ-HPX2100E(English).book 117 ページ ２００６年１１月２７日 月曜日 午後４時３４分
To Next Page
Loading...
