Panasonic AJ-HPX2100E - Shot Mark Function; Recording Setting and Operation Mode

35
Recording and Playback：Shot Mark Function
Recording and Playback
A shot mark is added to the thumbnail of a clip to
distinguish that clip from others. With the LCD monitor,
only clips that have shot marks can be viewed and/or
played back.
To add a shot mark during recording, press the SHOT
MARK button. The viewfinder displays “MARK ON” and
adds a shot mark to the thumbnail of the appropriate clip.
Another press of the button erases the shot mark.
Shot marks may also be added or erased using clip
thumbnails. For more information, see [Shot Mark] (page
105).
Note
The shot mark cannot be added or deleted when the
colour bar is output or set to the LOOP REC mode.
AJ-HPX2100 recording mode works according to the priorities outlined in the following table, relative to the setting of the
menus and switches.
* Disabled for color bars
Shot Mark Function
Adding Shot Marks
SHOT MARK
button
Recording Setting and Operation Mode
Functional
operation mode
Menu switches related to system/recording Switches
Proxy
recording
(optional)
PC MODE
REC
SIGNAL
LOOP REC
MODE
PRE REC
MODE
Recording a
Voice Memo
Shot Mark
USB device
USB
DEVICE
Disabled Disabled Disabled Disabled Disabled Disabled
USB host USB HOST Disabled Disabled Disabled Enabled Enabled Disabled
1394 Input record
OFF
1394 Disabled Disabled Enabled Enabled Disabled
LOOP REC
CAMERA
VIDEO
SDI (optional)
ON
Enabled
1s - 8s/15s
Disabled Enabled Disabled
Normal Recording OFF
Enabled
1s - 8s/15s
Enabled* Enabled* Enabled
AJ-HPX2100E(English).book 35 ページ ２００６年１１月２７日 月曜日 午後４時３４分