174
Updating the firmware incorporated into the camera-recorder
For the most up-to-date information on firmware, see the support page for P2 at the following Web site:
http://panasonic.biz/sav/
To update the firmware, confirm the version on AJ-HPX2100 by selecting MAINTENANCE
> DIAGNOSTIC 1 and
DIAGNOSTIC 2 screens from the menu, and then access the above Web site to download the firmware if necessary.
Then, load the downloaded file on AJ-HPX2100 through an SD memory card to complete the update. For more
information on how to update the firmware, see the above site.
Note
SD cards used on AJ-HPX2100 must be compliant with the SD standards. In addition, they must be formatted with the
camera-recorder. If they must be formatted with a PC, then download special software from the above Web site and use it
to format the SD cards.
Updating the firmware incorporated into the camera-recorder
AJ-HPX2100E(English).book 174 ページ ２００６年１１月２７日 月曜日 午後４時３４分
To Next Page
Loading...
