Panasonic AJ-HPX2100E - Page 160

160
Menu : Menu Description Tables
The ____ in the Adjustable Range column indicates the
preset mode.
USER SW
Items/
Data Saved
Adjustable
Range
Remarks
USER MAIN
SW
INH
S.GAIN
DS.GAIN
LINE MIX
S.IRIS
I.OVR
S.BLK
B.GAMMA
D.ZOOM
AT W
Y GET
DRS
ASSIST
C.TEMP
AUDIO CH1
AUDIO CH2
REC SW
RET SW
PRE REC
SLOT SEL
PC MODE
Allocate the USER MAIN button. For
descriptions of the functions, see
[Assigning Functions to USER MAIN,
USER1 and USER2 Buttons] (page 44).
–CUFR
USER1 SW INH
S.GAIN
DS.GAIN
LINE MIX
S.IRIS
I.OVR
S.BLK
B.GAMMA
D.ZOOM
AT W
Y GET
DRS
ASSIST
C.TEMP
AUDIO CH1
AUDIO CH2
REC SW
RET SW
PRE REC
SLOT SEL
PC MODE
Allocate the USER1 button. For
descriptions of the functions, see
[Assigning Functions to USER MAIN,
USER1 and USER2 Buttons] (page 44).
–CUFR
USER2 SW INH
S.GAIN
DS.GAIN
LINE MIX
S.IRIS
I.OVR
S.BLK
B.GAMMA
D.ZOOM
AT W
Y GET
DRS
ASSIST
C.TEMP
AUDIO CH1
AUDIO CH2
REC SW
RET SW
PRE REC
SLOT SEL
PC MODE
Allocate the USER2 button. For
descriptions of the functions, see
[Assigning Functions to USER MAIN,
USER1 and USER2 Buttons] (page 44).
–CUFR
SW MODE
Items/
Data Saved
Adjustable
Range
Remarks
RET SW R.REVIEW
CAM RET
D.ZOOM
For setting the function when the USER
button on the unit, to which the RET
button of the lens or the RET SW
function is allocated, is pressed.
R.REVIEW:
REC view function
It is possible to check a last few
seconds of the records taken.
CAM RET:
Return video function
It is possible to confirm the return
video signals (HD: analog HD-Y
signals, SD: VBS signals) supplied to
the GENKLOCK IN connector on the
unit by using the viewfinder.
D.ZOOM:
Digital zoom function
It is possible to enable or disable the
digital zoom function.
Notes
z
When video signals in a format
different from that for the video mode
of the camera-recorder, return video
is not properly displayed.
z When the GENLOCK item (the
GENLOCK screen on the SYSTEM
SETTING page) is set to INT, the
return video image may be displayed
as slightly shaking horizontally.
–CUFE
S.BLK LVL OFF
–10
–20
–30
For setting the super black level.
–CUFE
AUTO KNEE
SW
ON
OFF
For selecting ON/OFF of the AUTO
KNEE function and DRS function.
When it is set to OFF, the AUTO KNEE
may not function even if the AUTO
KNEE switch is turned ON.
When the DRS function is enabled and
the AUTO KNEE switch is positioned to
ON, the DRS function turns on.
SCUFE
SHD,ABB SW
CTL
ON
OFF
For the setting to adjust the black
shading automatically when the AUTO
W/B BAL switch is held to the ABB side
for 8 seconds or more.
–CUFE
COLOR BARS SMPTE
FULL BARS
SPLIT
ARIB
For selecting the color bar to be used.
SMPTE: Color bar complied with the
SMPTE standards
FULL BARS: Full color bar
SPLIT: SPLIT color bar for SNG
(Satellite News Gathering)
ARIB: Color bar complied with the
ARIB standards
–CUFE
S.GAIN OFF
L/M/H
S.GAIN
For selecting the method used to
release the super gain mode.
L/M/H : Disabled when the gain
selector switch is operated.
S.GAIN : Disabled only with the
S.GAIN switch (USER
button).
–CUFE
AJ-HPX2100E(English).book 160 ページ ２００６年１１月２７日 月曜日 午後４時３４分