94
Preparation：Mounting the lens and Performing the Flange Back and White Shading
When making the white shading correction, make the
adjustment while observing the R, G, and B waveforms in
the horizontal and vertical directions with the waveform
monitor.
This now completes the white shading adjustments.
The adjustment values are now stored in the non-volatile
memory so that even when the unit’s power is turned off,
there will be no further need to perform the white shading
adjustment.
AJ-HPX2100E(English).book 94 ページ ２００６年１１月２７日 月曜日 午後４時３４分
To Next Page
Loading...
