Panasonic AK-HRP1000G

Item Setting value Setting details
ROP DATA SAVE NO?
YES?
Save the unit's setting information.
This applies to the following menus.
[ROP SETTING][CONNECT SETTING][CAMERA IP SETTING][ROP IP SETTING]
After starting this process, do not turn off the unit or remove SD cards until the pro-
cess is complete.
ROP DATA LOAD NO?
YES?
Load the unit's setting information.
This applies to the following menus.
[ROP SETTING][CONNECT SETTING][CAMERA IP SETTING][ROP IP SETTING]
After starting this process, do not turn off the unit or remove SD cards until the pro-
cess is complete.
SD CARD FORMAT NO?
YES?
Format the SD card.
INITIAL with NW NO?
YES?
Return the unit's settings to the factory default values.
This applies to the following menus.
[ROP SETTING][CONNECT SETTING][CAMERA IP SETTING][ROP IP SETTING]
INITIAL NO?
YES?
Return the unit's settings to the default values.
This applies to the following menus.
[ROP SETTING]
POWER BUTTON SHORT
LONG
The method of operations for the [POWER HED] and [POWER VF] buttons can be
changed.
SHORT: The power can be turned on or off when pressing the [POWER HED] button
or the [POWER VF] button.
LONG: The power can be turned on or off when pressing and holding the [POWER
HED] button or the [POWER VF] button.
IRIS CALIBRATION
TOP
- IRIS CALIBRATION adjusts the operating range of the [IRIS] lever.
[IRIS CALIBRATION TOP] is executed when the [IRIS] lever is moved to the OPEN
end, and [IRIS CALIBRATION BOTTOM] is executed when it is moved to the CLOSE
end.
IRIS CALIBRATION
BOTTOM
UPGRADE NO?
YES?
Updates the software of the unit.
After starting this process, do not turn off the unit or remove SD cards until the pro-
cess is complete.
PAINT VOL CO STD
MODE1
MODE2
Allows you to change the control range for white balance, pedestal, and flare.
STD: Standard control range.
MODE1: About half the control range of STD.
MODE2: About one-third the control range of STD.
SYSTEM VERSION (Version display) Displays the system version.
SOFT VERSION (Version display) Displays the software version.
FPGA VERSION (Version display) Displays the FPGA version.
- 113 -
ROP menu