26
WEB User Interface
1. Select Setup > Image/Audio > System.
2. You can scroll down and do either one of the followings to enable RS422.
Select Panasonic for Serial Communication Protocol.
Select Standard for Serial Communication Protocol.
In the drop-down list of Connector Select, choose RS422.
3. Click Set to enable the configuration of RS422.
OSD Menu
Select System > Serial Com. Protocol > Panasonic. RS422 is thus enabled.
Or
Select System > Serial Com. Protocol > Standard. Right below Serial Com. Protocol, select
Connector Select > RS422. RS422 is thus enabled.
To Next Page
Loading...
