Panasonic AW-HE20KP - System Example 5 (USB Connection, Web Camera)

30
System example 5 (USB connection, Web
camera)
AW-HE20
USB cable
Communication software
(optional accessory)
Personal computer
Microphone
Supplied AC
adaptor
 Use a USB cable that is compatible with the USB 2.0 specification.
Connect a USB Type-C connector to the unit.
 You can connect the unit to your computer or lap top via a USB cable and use the unit as a USB
camera.
[Note]:
1. Access Setup > Basic > Priority mode on the Web User Interface. In the drop-down list of
Priority mode, you can select either HDMI/USB or USB (Video Conference) and click
Set.
2. Since USB (Video Conference) mode does not support HDMI output, OSD menu cannot
be accessed under USB (Video Conference) mode.
3. Under USB (Video Conference) mode, if you connect the unit to the PC using a USB cable,
only UVC connection will be supported. USB Audio Class will be off.
 Use communication software (optional accessory) that is compatible with the USB Video Class
and USB Audio Class.