76
9
Pan-tilt buttons and menu operation buttons
(1)These are used to change the unit’s direction. The
unit is tilted in the up/down direction using the [▲] and
[▼] buttons and panned in the left/right direction using
the [◄] and [►] buttons.
The [○
] button does not work during tilting and
panning.
When the [▲] or [▼] and [◄] or [►] buttons are
pressed at the same time, the unit moves diagonally.
(2) The buttons are used for menu operations when
the unit displays the camera menus.
Use the [▲] and [▼] buttons to select the menu items.
When a selected item has a sub-menu, the sub-menu
will be displayed by pressing the [] or [►] button.
When the [] or [►] button is pressed on the setting
menu at the bottom hierarchical level, the new setting
10
SLOW button
This is used to change the movement speed at which
the panning, tilting, zooming and focusing operations
are performed to the low speed.
11
MENU button
Press and hold for 2 seconds to display the camera
12
HOME button
When this is pressed for 2 seconds, the unit’s
direction (panning or tilting) returns to the front of the
unit and the zoom level of the unit is changed back to
13
ZOOM button
These are used to adjust the digital zoom.
The zoom is adjusted in the wide-angle using the [W]
button and in the telephoto using the [T] button
14
FAST button
This is used to change the movement speed at which
the panning, tilting, zooming and focusing operations
are performed to the high speed.