Panasonic AW-HE60

55
Operating
Instructions
Specifications
Power requirements: DC 12 V
(AC adaptor provided)
Current consumption:
1.3 A (AW-HE60H)
1.4 A (AW-HE60S)
indicates safety information.
 GENERAL
Ambient operating temperature:
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature: –20 °C to 50 °C (–4 °F to 122 °F)
Allowable humidity ranges:
20 % to 90 % (no condensation)
Mass: Approx. 1.4 kg (3.09 lb)
Dimensions (W x H x D):
160 mm  178 mm  166 mm
(6-5/16 inches  7 inches 
6-17/32 inches)
[excluding protrusions, cable cover,
direct ceiling mount bracket]
Finish:
Light silver matte finish
Controller supported: AW-RP655, AW-RP555, AW-RP50
 It may be necessary to upgrade
the version of the controller so that
the controller will support the unit.
 INPUT
Input connector: DC 12 V IN,
EXT SYNC IN (BNC)
(AW-HE60S only)
 BBS (Black Burst Sync) signal
supported
 OUTPUT
Video output
[AW-HE60H]
HDMI: HDMI connector
 HDCP is not supported.
 VIERA Link is not supported.
[AW-HE60S]
SDI: Compliant with the SMPTE292M/
SMPTE259M standards/75 
(BNC  1)
[Specifications common to both models]
Composite:
1.0 V [p-p]/75 
(MULTI-I/F  1)
Y/Pr/Pb: [HD] Y: 1.0 V [p-p]/75 ,
Pr · Pb: 0.7 V [p-p]/
75  (MULTI-I/F 1)
[SD] Y: 1.0 V [p-p]/75 ,
Pr · Pb: 0.7 V [p-p]/
75  (MULTI-I/F  1)
(59.94 Hz)
Pr · Pb: 0.525 V [p-p]/
75  (MULTI-I/F  1)
(50 Hz)
 For Y/Pr/Pb, the 1080, 720 or SD format is selected
depending on the format setting.
 INPUT/OUTPUT
Input/Output connector
LAN:
LAN connector for IP control (RJ-45)
RS-422: CONTROL IN RS422A
(MULTI-I/F)