Panasonic AW-UE100WP

Web screen configurations
Web setup screen [Setup]
The settings for the unit are selected on this screen.
<NOTE>
• The setting menu operations can be performed only by users whose access level is “1.Administrator”.
For the procedure used to set the access level, refer to page 139.
• If the value of a setting is changed using the OSD menu or a different web browser, the setting value and the displayed value may not match. In that
case, update the setup menu display screen of that web browser.
1
2
3
5
4
6
7
8 9
1. Setting status [Setting status]
The setting status screen [Setting status] is displayed when the button
is clicked.
→ “Setting status screen [Setting status]” (→ page 102)
2. Basic settings [Basic]
System button [System]
The system screen [System] is displayed when the button is clicked.
→ “System screen [System]” (→ page 103)
Date&Time button [Date&Time]
The Date & time screen [Date&Time] is displayed when the button is
clicked.
→ “Date & time screen [Date&Time]” (→ page 110)
Live page button [Live page]
The live page screen [Live page] is displayed when the button is
clicked.
→ “Live page screen [Live page]” (→ page 110)
3. Image screen [Image/Audio]
IP video settings button [Video over IP]
The IP video settings screen [Video over IP] is displayed when the
button is clicked.
→ “IP video settings screen [Video over IP]” (→ page 111)
Audio button [Audio]
The audio setting screen [Audio] is displayed when the button is
clicked.
→ “Audio setting screen [Audio]” (→ page 120)
Image adjust button [Image adjust]
The image adjust screen [Image adjust] is displayed when the button
is clicked.
→ “Image adjust screen [Image adjust]” (→ page 121)
Lens button [Lens]
The Lens setting screen [Lens] is displayed when the button is
clicked.
→ “Lens setting screen [Lens]” (→ page 129)
UHD crop button [UHD Crop]
The UHD crop setting screen [UHD Crop] is displayed when the
button is clicked.
→ “UHD crop setting screen [UHD Crop]” (→ page 130)
Preset position button [Preset position]
The preset position screen [Preset position] is displayed when the
button is clicked.
→ “Preset position screen [Preset position]” (→ page 132)
100 101