Max bit rate(per client)
[512kbps, 768kbps, 1024kbps, 1536kbps, 2048kbps, 3072kbps,
4096kbps, 6144kbps, 8192kbps, 10240kbps, 12288kbps,
14336kbps, 16384kbps, 20480kbps, 24576kbps]
Specify the NDI|HX bit rate per client.
Factory settings: 10240kbps
<NOTE>
• The NDI|HX bit rate setting range depends on the resolution.
Image quality
This cannot be configured on [NDI|HX stream] screen.
Transmission type
The same as H.264 Transmission type (→ page 114).
Unicast port(Image)
The same as H.264 Unicast port(Image) (→ page 115).
Unicast port(Audio)
The same as H.264 Unicast port(Audio) (→ page 115).
Multicast address
The same as H.264 Multicast address (→ page 115).
Multicast port
The same as H.264 Multicast port (→ page 115).
Multicast TTL/HOPLimit
The same as H.264 Multicast TTL/HOPLimit (→ page 115).
<NOTE>
• When [IP(UDP)] of [Tracking Data Output] is set to [On], video
transmission via IP may be delayed or the video may suffer frame
loss. (→ page 136)
We recommend [IP(UDP)] of [Tracking Data Output] is set to [Off] in
the NDI|HX mode.
• When the authentication feature is enabled, the unit may not be
connected in NDI|HX mode.
In the NDI|HX mode, set [User auth.] (→ page 139) and [Host
auth.] (→ page 140) to [Off].
• In NDI|HX mode, [IP Out1] and [IP Out2] in the [UHD Crop] screen
will have a linked operation.
z High bandwidth NDI
Make NDI transmission settings.
The setting is confirmed with the [Set] button.
High bandwidth NDI
Format
Displays the resolution of NDI images.
<NOTE>
• For the resolution set to Format, confirm the output conditions for
each video format (→ page 20).
Source name
Set the device name displayed when this unit is detected by software
applications and hardware compatible with NDI.
Factory settings: NDI Device [serial number of this unit]
Protocol [TCP, UDP]
Sets the format of unicast transmission to be used.
Factory settings: TCP
Multicast Transmit [On, Off]
Sets whether to perform multicast transmission of images for the
software applications and hardware compatible with NDI.
Factory settings: Off
Address(IPv4)
[IPv4 : 244.0.0.0 to 239.255.255.255]
Enter the multicast IP address.
Images and audio will be sent to the specified IP address.
Factory settings: 239.192.0.30
<NOTE>
• Verify usable multicast IP addresses before entering this setting.
118 119
Web screen configurations (continued)
To Next Page
Loading...
