EasyManua.ls Logo

Panasonic AW-UE100WP

Panasonic AW-UE100WP
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preset Crop [Off, On]
When the preset memory is played back, set whether the
reproduction of content set in the various [Crop Mode] menus is off/
on.
When set to [On], the content set in the various [Crop Mode] menus is
reproduced when preset memory is played back.
When set to [Off], the content set in the various [Crop Mode] menus is
not reproduced when preset memory is played back, with the current
values being kept.
Factory settings: Off
<NOTE>
This is enabled only when [Format] in [System] screen is the
following.
2160/59.94p, 2160/29.97p
2160/50p, 2160/25p
2160/24p, 2160/23.98p
This is only enabled when [Crop Mode] is set to [Crop(1080)] or
[Crop(720)].
Preset Thumbnail Update [Off, On]
Turn off/on the function for registering the still image (thumbnail) for
the images being output when a preset memory is registered.
When set to [On], the still image (thumbnail) for the images being
output is registered when registering a preset memory.
When set to [Off], the still image (thumbnail) for the images being
output is not registered when registering a preset memory, but rather
the still image (thumbnail) previously registered is maintained.
Factory settings: On
<NOTE>
When the IP for [OSD Mix/Crop Marker] is [On], the menu screen is
included in the thumbnails.
When [Crop Mode] is [Crop(1080)] or [Crop(720)], the cropped still
image is registered rather than the Full image.
When uploading Camera(ALL) or Camera(SYSTEM) on the web
screen or other access, the still image (thumbnail) that has been
registered in preset memory will be erased. (→ page 157)
Preset Name [Reset, Hold]
When registering a preset memory, set whether to reset the
previously registered preset name or keep it.
Reset When registering a preset memory, reset the
previously registered preset name.
The preset name after resetting will be [Preset
***
].
(
***
is a 3 digit preset number: 001 to 100)
Hold When registering a preset memory, keep the
previously registered preset name.
Factory settings: Reset
<NOTE>
The factory default setting for the preset name is [Preset
***
]. (
***
is
a 3 digit preset number: 001 to 100)
The registration of preset names can be done in the web browser.
0 to 9, A to Z, a to z, _ , and space
Preset Iris [Off, On]
When the preset memory is played back, set whether the
reproduction of the values in the various menus related to Iris is off/
on.
When set to [On], the values set in the various menus below are
reproduced when preset memory is played back.
- Picture Level
- Iris Mode
- Auto Iris Speed
- Auto Iris Window
Factory settings: Off
<NOTE>
Its setting takes effect when [Mode A] or [Mode B] has been
selected as the [Preset Scope] setting.
Preset Zoom Mode [Mode A, Mode B]
Select the zoom operation for when preset memory is recalled.
Mode A Perform the zoom operation in line with the pan/tilt
operation.
Mode B Perform the zoom operation quicker than the pan/tilt
operation.
Factory settings: Mode A
Freeze During Preset [Off, On]
Turn the function for freezing images during preset playback off/on.
When this is set to [On], preset playback is performed with a still of
the image immediately preceding the start of preset playback being
output. The image freeze is released when preset playback is finished.
Factory settings: Off
134 135
Web screen configurations (continued)

Table of Contents

Related product manuals