Panasonic AW-UE100WP

Camera menu Item Factory setting Selection items
Top Menu Output Output 2/5 HDMI
Format AW‑UE100WP/AW‑UE100KP/
AW‑UE100WPC/
AW‑UE100KPC:
2160/59.94p
AW‑UE100WE/AW‑UE100KE/
AW‑UE100WED/
AW‑UE100KED:
2160/50p
[System Format]
2160/59.94p
2160/29.97p
1080/59.94p
1080/59.94i
1080/29.97p
1080/29.97PsF
1080/23.98p(59.94i)
*
1
720/59.94p
2160/50p
2160/25p
1080/50p
1080/50i
1080/25p
1080/25PsF
720/50p
2160/24p
1080/24p
2160/23.98p
1080/23.98p
1080/23.98PsF
[HDMI]
2160/59.94p
*
2
1080/59.94p
*
3
2160/29.97p
*
2
1080/29.97p
1080/59.94p
1080/59.94i
1080/29.97p
1080/29.97p
1080/23.98p(59.94p)
*
4
720/59.94p
2160/50p
*
2
1080/50p
*
5
2160/25p
*
2
1080/25p
1080/50p
1080/50i
1080/25p
1080/25p
720/50p
2160/24p
*
2
1080/24p
1080/24p
2160/23.98p
*
2
1080/23.98p
1080/23.98p
1080/23.98p
Video Sampling 4:2:2/10bit 4:2:2/10bit, 4:2:0/8bit
Output 3/5 Bar Camera Camera, Colorbar
Color Bar Type Type2 Type1, Type2
Tone Normal Off, Low, Normal
Audio Off Off, On
Input Type Line Mic, Line
Volume Level 0dB –36dB to +12dB (Step: 3dB)
Plugin Power Off Off, On
Output 4/5 OSD Mix/Crop Marker
12G SDI On Off, On
3G SDI On Off, On
HDMI On Off, On
NDI On Off, On
IP/NDI|HX On Off, On
Output 5/5 OSD Off With R-Tally Off Off, On
OSD Status Off Off, On
Tally Enable Enable, Disable
Tally Brightness Low Low, Mid, High
Status Lamp Enable Enable, Disable
External Output
Output1 Off Off, R-Tally, G-Tally
Output2 Off Off, R-Tally, G-Tally
UHD Crop UHD Crop
1/2
3G SDI Out Crop Full, Crop
NDI Out Crop Full, Crop
IP Out1 Crop Full, Crop
IP Out2 Crop Full, Crop
Crop Marker YL+G+MG Off, YL, G, MG, YL+G, YL+MG, G+MG,
YL+G+MG
*
1
It denotes “1080/23.98p over 59.94i”.
*
2
Cannot be selected when [UHD Crop] is [Crop(1080)] or [Crop(720)].
*
3
When [UHD Crop] is [Crop(720)], output is 720/59.94p.
*
4
It denotes “1080/23.98p over 59.94p”.
*
5
When [UHD Crop] is [Crop(720)], output is 720/50p.
90
Camera menu item table (continued)