z Matrix Matrix Type [Normal, EBU, NTSC, User]
Select the type of color matrix.
The setting is confirmed with the [Set] button.
Normal
This item is used to load the preset color matrix data and
compensate for the saturation and color phase.
EBU
NTSC
User On the [Matrix] screen, the [Linear Matrix] and [Color
Correction] values can be adjusted by the user.
This cannot be set when the [Color Setting] is [V-Log].
Factory settings: Normal
Adaptive Matrix [Off, On]
Set Off/On the function that suppresses the linear matrix to suit the
shooting conditions.
This cannot be set when the [Color Setting] is [V-Log].
Factory settings: Off
Matrix Settings
Linear Matrix
This can be set when [User] has been selected as the [Matrix Type]
setting.
R-G
Adjust the color to between –63 and +63 for each axis
direction.
R-B
G-R
G-B
B-R
B-G
This cannot be set when the [Color Setting] is [V-Log].
Factory settings: (→ page 80)
Color Correction
This can be set when [User] has been selected as the [Matrix Type]
setting.
Adjust the saturation and hue for each color.
This cannot be set when the [Color Setting] is [V-Log].
All of the following Color Correction items also cannot be set when
[Color Setting] is [V-Log].
Saturation [–63 to +63]
Adjust the saturation for each color.
Phase [–63 to +63]
Adjust the hue for each color.
B_Mg Color between blue and magenta
Mg Magenta
Mg_R Color between magenta and red
Mg_R_R Color with a 1:3 magenta to red ratio
R Red
R_R_YI Color with a 3:1 red to yellow ratio
R_Yl Color between red and yellow
R_Yl_Yl Color with a 1:3 red to yellow ratio
Yl Yellow
Yl_Yl_G Color with a 3:1 yellow to green ratio
Yl_G Color between yellow and green
G Green
G_Cy Color between green and cyan
Cy Cyan
Cy_B Color between cyan and blue
B Blue
Factory settings: (→ page 81)
122
Web screen configurations (continued)
To Next Page
Loading...
