Lens setting screen [Lens]
The setting is confirmed with the [Set] button.
Focus Mode [Manual, Auto]
Select auto or manual mode for the focus adjustment function.
Manual Adjust focus manually.
Auto Always adjust focus automatically.
Factory settings: Auto
Zoom Mode [Opt.Zoom, i.Zoom, D.Zoom]
Set the maximum magnification rate for zoom.
Opt.Zoom Use only optical zoom.
Optical zoom up to 20× is possible.
i.Zoom Enable the i.Zoom function.
When this function is enabled, digital zoom is used while
reducing image degradation.
When [Format] in the [System] screen is 2160/59.94p,
2160/29.97p, 2160/50p, 2160/25p, 2160/24p,
2160/23.98p
Up to 24× zoom is possible combining optical zoom and
digital zoom.
• When [Format] in the [System] screen is other than one
of these, up to 32× zoom is possible combining optical
zoom and digital zoom.
D.Zoom Enable the digital zoom function.
Higher digital zoom magnifications will result in coarser
images.
Factory settings: Opt.Zoom
Max Digital Zoom
[×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10]
Set the maximum digital zoom magnification.
This is only enabled when [Zoom Mode] is set to [D.Zoom].
Factory settings: ×10
<NOTE>
• Higher digital zoom magnifications will result in coarser images.
Digital Extender [Off, ×1.4, ×2.0]
Make settings for the digital extender function.
Off Turn the digital extender function off.
×1.4 The digital zoom will be fixed at 1.4×.
×2.0 The digital zoom will be fixed at 2.0×.
This is only enabled when [Zoom Mode] is set to [Opt.Zoom].
Factory settings: Off
OIS [Off, On]
Turn the optical image stabilization (OIS) function off/on.
<NOTE>
• The optical image stabilization (OIS) function’s level of correction is
reduced during pan/tilt operations.
Factory settings: Off
UHD crop setting screen [UHD Crop]
Crop Output PTZ
This is used for camera control. The same operations are possible
as with the camera controller operated in the live screen [Live].
(→ page 92)
Crop Mode [Off, Crop(1080), Crop(720)]
Set the Crop function which crops UHD (3840×2160) images to
1920×1080 images or 1280×720 images.
Off Disable the Crop function.
Crop(1080) Crop UHD (3840×2160) images to 1920×1080 images.
This is enabled only when [Format] in [System] screen is
the following.
2160/59.94p, 2160/29.97p
2160/50p, 2160/25p
2160/24p, 2160/23.98p
Crop(720) Crop UHD (3840×2160) images to 1280×720 images.
This is enabled only when [Format] in [System] screen is
the following.
2160/59.94p, 2160/50p
Factory settings: Off
<NOTE>
• When [Crop Mode] is changed, IP video transmission is temporarily
stopped.
• When [Crop Mode] is [Crop(1080)] or [Crop(720)], the following
values cannot be set in [Streaming mode].
H.264(UHD), U.265(UHD), JPEG(UHD), SRT(H.264 UHD),
SRT(H.265 UHD)
(→ page 105)
• When H.264(UHD), U.265(UHD), JPEG(UHD), SRT(H.264 UHD) or
SRT(H.265 UHD) is selected in [Streaming mode] and [Crop Mode]
is switched to [Crop(1080)] or [Crop(720)], the [Streaming mode]
setting changes to [H.264].
122 123
Web screen configurations (continued)
To Next Page
Loading...
