Installation Instructions
5. Check the mounting.
6. Connect the rear panel connectors.
<NOTE>
• Do not connect PoE cable to the RS‑422 port.
• For details on recommended products, refer to the catalog or consult your local dealer.
• Always disconnect the power supply before connecting or disconnecting cables.
Connecting or disconnecting cables while the power is turned on may result in malfunctions.
Coaxial cable
HDMI cable
USB cable
LAN cable
DC cable (External DC power supply)
14 15
Stand-alone installation (when the mount bracket is going to be used) (continued)
To Next Page
Loading...
