Operating Instructions
Accessories
Check that the following accessories are present and accounted for.
• After removing the product from its container, dispose of the power cable cap (if supplied) and packing materials in an appropriate manner.
Mount bracket for installation surface
(Hanging/Desktop) (1)
Main unit mounting screw (with flat
washer, spring washer)
M3×6 mm (1/4 inches) (1)
Drop-prevention wire (1)
Drop-prevention wire mounting screw
(1)
(comes attached to the unit)
Bracket mounting screws (bind-head)
M4×10 mm (13/32 inches) (6)
Lens cap (1)
(comes attached to the unit)
How to remove the lens cap
Move the lens cap in the direction of the arrow to remove.
Optional accessories
z Wireless remote control AW-RM50AG (Size “AA” dry battery x 2, obtained separately)
<NOTE>
• For details on optional accessories, refer to the catalog or consult your local dealer.
30 31
To Next Page
Loading...
