2
This indicator lights when the hard disk drive is accessed.
Not lit : Battery pack is not connected or charging not
being performed.
Orange* : Charging in progress.
Green* : Fully-charged.
Blinking green : Battery is discharging to prescribed charging level
in high temperature mode.
Red : The battery level is very low (the charge is less
than approx. 9% capacity).
Connect the AC adaptor. You can use the com-
puter when the indicator light is orange. If you do
not have an AC adaptor, save your data and power
off your computer. After replacing the battery pack
with a fully charged one, turn your computer on.
Blinking red* : Battery pack or charging may not be working prop-
erly. Quickly save your data and power off your
computer. Remove the battery pack and discon-
nect the AC adaptor, then connect them again.
If the problem persists, contact Panasonic Tech-
nical Support.
Blinking orange* : Battery cannot be recharged because the inter-
nal temperature of the battery pack is outside of
the acceptable temperature range for recharging.
Once the allowable range requirement is satis-
fied, charging begins automatically.
Not lit : Power off / Hibernation mode
Green : Power on
Blinking green : Standby mode
Not lit : Not ready / Connected with the wireless display
Green : Ready
Hard disk drive sta-
tus
Battery pack status
Power status
Wireless display
status
LED Indicators
* When the AC adaptor is connected.
To Next Page
Loading...
