34
Technical Information
Network Connections and Communications Software
If the power saving function (standby or hibernation mode) activates while communica-
tions software is being used, the network connection may be interrupted, or perfor-
mance may be adversely affected. If this happens, restart the computer.
Be sure to close the communications software before using the power saving function.
When using the computer in a network environment, we recommend that you set [Sys-
tem standby] and [System hibernates] to [Never], using the following procedure:
[Start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power
Schemes]
When using the Files on the Retail Version of the Windows CD-ROM
The Windows files included in the Retail Version of the Windows CD-ROM for each OS
are contained in the following folders:
c:\windows\docs, c:\windows\dotnetfx, c:\windows\i386, c:\windows\support,
c:\windows\valueadd
Hardware Devices
After selecting on the taskbar, do not press [Stop] for [PRISM2 IEEE 802.11 PC
CARD Adapter], as it is the necessary device for wireless connection. If you do stop this
device, restart the computer.
To Next Page
Loading...
