34
Battery Power
1 Power off your computer.
(⇒Operating Instructions "Starting Up/Shutting Down")
Do not shut down using the standby function.
2 Turn your computer over and remove the cover (A).
Slide and remove the cover without releasing the mark (B).
3 Remove/Insert the battery pack (C).
z Removing
Slide the latch (D), and then without releasing it, pull the tab (E) on the battery
pack and remove it from the computer.
z Inserting
Firmly attach the battery pack to the connector.
4 Reattach the cover.
Slide the cover back into place.
CAUTION
z For an improperly attached cover, your battery pack may fall out while you are
carrying around your computer.
z Be sure the tab does not get caught when closing the cover.
To Next Page
Loading...
