85
Setup Utility
*4
The display destination in cases where Windows is not running is set here. When an external
display is connected, the computer displays on both the internal LCD and the external display after
Windows starts up regardless of the [Display] setting.
NOTE
z [Advanced] menu cannot be changed when the Setup Utility is started up with the
User Password.
Parameters
(Underline indicates settings at the time of factory shipment.)
Advanced Menu
Serial Port: [Enable]
Parallel Port: [Enable]
Mode: [ECP]
Modem: [Enable]
LAN: [Enable]
Boot up from LAN: [Enable]
Wireless LAN: [Enable]
Serial Port Disable
Enable
Parallel Port Disable
Enable
Mode
*1
Uni-directional
Bi-directional
EPP
E
CP
To Next Page
Loading...
