99
Dealing with Problems (Advanced)
When you want to display the fonts or
icons at a larger size
z Change the size of the icons, etc. using “Icon Enlarger” (Î page 92).
z You can also change the settings as follows (for more details, refer to the
Windows Help).
A Select [start] - [Control Panel] - [Appearance and Themes] -
[Display] - [Appearance].
B Select the font size in [Font size], and select [Effects] and then add
the check mark for [Use large icons] to increase the icon size.
C Select [OK], then select [OK].
When a video such as an MPEG file
and a DVD video is being played with
WinDVD or Windows
®
Media Player,
the display destination cannot be
switched using
Fn
+
F3
z The display destination cannot be switched while a video such as an MPEG file
and a DVD video is playing.
Stop playing the video before switching the display destination.
An error occurs or the computer
freezes while using Dualview
z If you use a 3D screen saver while in Dualview mode at a high resolution, an
error may occur or the computer may freeze. Under these conditions, do not
use a 3D screen saver.
When the screensaver is set, an error
will occur during a resume operation
z When the computer automatically enters the standby or hibernation mode while
the screensaver is running, an error may occur during a resume operation. In
such cases, turn off the screensaver or try changing the pattern of the
screensaver.
Setup Utility
[Enter Password] is displayed z Enter the Supervisor Password or User Password. If you have forgotten it,
contact Panasonic Technical Support.
[Advanced] and [Boot] menu can not
be registered
z Restart the Setup Utility with the Supervisor Password.
Some items in [Security] menu can not
be registered
z Restart the Setup Utility with the Supervisor Password.
F9
does not work z Restart the Setup Utility with the Supervisor Password.
Shutting Down
Windows cannot be shut down or
restarted
z If a USB device is connected, try removing it.
Display
To Next Page
Loading...
